Discover3

The new discover series high power headlamp have a fashion design and use PC/ABS engineering plastic material as its shell.Glare challenges the distance limit and near-heighlight saves energy.

Discover series outdoor headlamp use 3W CREE high power source.Both of them have dimming function, there are 5 kinds of modes:high,middle,low,Saving electricity and strobe. The longes illumination distance is beyond 70 meters.The mode of Saving electricity will operate for up to 150 hours.That is to say, discover series headlamp combine super bright and energy saving perfectly.It has achieved the CE and ROHS standards and it also has IPX water-proof grade 5.This light is suitable in fishing, mountaineering,searching holes and other specialized outdoor activities.

SPECIFICATIONS

Item No: D3

Light Source: 1 CREE 3W

Power Source: 4AA

Weight Without Battery:152g

Weight With Battery:247g

ORANGE

●Illumination distance and burn time

Discover3

CREE 3W

Ⅰ.Use instruction
1.Install battery
●Open the battery box,according to right positive and negative extreme direction and put the 4AA batteries into the box then close the battery box.Please assure that the battery box is sealed and identical.
●Attention:he batteries'type should be the same,and not to mix the new and sencondary batteries.please don't continue to use the leakage of battery.
2.Turn on the headlamp
●After putting on the headlamp correctly,press the button and choose the work mode according to the surroundings and adjust the light angle.
●Both of them have dimming function.there are 5 kinds of modes:hight,middle,low,Saving electricity and strobe.
●Skill:if you find the brack is loosen,use the screwdriver to tighten it.
3.Adjust the elastic band
●According to personal head size,adjust the elastic band with the adjusting lock.
●Suggestion:if you put it on for a long time,you can make the band looser.

Ⅱ.Suitable Environment
●The suitable temperature for using is from -30℃ to 60℃, otherwise, the LED and the batteries'duration will be reduced.
●Discover9 could not be used for diving,otherwise,the water leaking may cause a short circuit.

Ⅲ.Maintance and cleaning
●Please choose the same type of high quality alkalkaline battery on discover3 products.
●Please keep the elastic band dry after using.
●When the elastic band gets dirty.you can remove and clean it separately.
●After it gets dry,you can assemble it as original.
●Avoid the glass lens in the lamp-chimney scrubs with hard object, which will get the lens abrasion and affection the light transmission.
●If discover3 products do not use for a long time,you shoul to out the batterys to avoid leaking of them.
●The restrictions voltage of discover3L charging up is 8.4V.Please use sunree authorized chargers.
●Warning:please don't put battery into the fire,as it may be explosion.

Ⅳ.Malfunction and resolvent
Press the button but the headlamp does'nt work.
*DISCOVER3
●Whether the batteries' positive and negative extreme is right or not.
●Whether the batteries run out or not.
●Check the film in the battery box,whether there is a very corrosive phenomenon or not. If the connection is wrong because of corrosion phenomenon.You can use Cuodao or Shabu to rub genty the surface of corrosion.
DISCOVER3L
●Make sure that the lithium battery has electricity.
●Whether the connection is right or not.
If you still can't solve the problem,you can contact the agents.