Explor50

E50 uses light and convenient design, 5 supper bright led as the light source and 3AAAbatteries. The battery box and the lamp are designed to be one structure which makes it very light and fashion. Four working mode to adjust light according to the environment, the duration light time can last 200hours. It can be used for hiking in the night, hunting, fishing, reading and so on, it has the certification of CE and ROHS, waterproof grade IPX5,shock and cold resistant. Nice choice for outdoor activities.

SPECIFICATIONS

Item No: E50

Light Source: 7 white +6 red +6 blue LEDs

Power Source: 3AAA

Weight Without Battery: 99g

Weight With Battery:134g

dark blue
orange
green

Item No.	Work Mode	Light distance	Duration
E70	●Press once 1pc led turns on ●Press twice 3pcs led turn on ●Press three times all leds turn on ●Press four times flash	15/12/10m

Ⅰ.Use instruction
1.Instrall battery
First turn the locknut in the direction of counter clockwise,open the battery box,according to the right positive and negative extreme direction and put the AAA batteries into the box. Close the buttery box and lock the locknut.
●Attention:The batteries'type should be the same
●Avoid to mix the new and secondary batteries
2.Adjust the elastic band
According to personal head size,adjust the elastic band with the adjusting lock.
●Suggestion:If need to put on for long time,please make the band looser.
3.Turn on the headlamp
After putting on the headlamp correctrly,press the button and choose the work mode according to the surroundings and adjust the light angle.
●If you find the bracked is loosen,use the screwdriver to tighten it.

Ⅱ.Suitable environment
The suitable temperature for using is from -30℃ to 60℃,otherwise, the LED and the batteries' duration will be reduced. E series could not be used for diving, the water proof level is IPX4, and otherwise, the water leaking may cause a short circuit.

Ⅲ.Maintance and cleaning
●Please choose the same type of high quality alkaline battery.
●Please keep the elastric band dry after use.
●If the elastic band gets dirty, remove it and clean it separately.When it gets dry,assemble it as original.
●Aoid the glass lens in the lamp-chimmery scrubs with hard object,which will get the lens abrasion and affection the light transmission.
●If not use fore a long time,take out the battery to avoid leaking of the battery.

Ⅳ.Malfunction and resolvent
Press the button but the headlamp doesn't work.
●Check the battery box to find whether the positive and negative extreme is correct.
●Check the batteries to see if they are run out.Please choose the same type of high quality alkaline battery and avoid mixing the new and old batteries.
●If still can not solve the problem,contact your dealer.