Explor90
INTRODUCTION | COLORS | TECHNOLOGY | USE INTRODUCTION
Explor90
The new E series outdoor headlamp has a fashion design and uses ABS engingeering plastic material as its shell.With pressing the button, the super bright LED could be adjusted to low,middle,hight and flash.
SUNREE headlamp could be used in outdoor life or at home for emergency. The new E series'18000MCD super bright white LED is electricity savable and the service lift could be 20,000 hours.
Postpositioned fission type AAA battery box balances the weight of the head, which makes it more comfortable for long time using. The headlamp has a watererproof design which reached level IXP4 which could be used in rainy days. It also has the design of cold-resistant and shock resistance function.
SPECIFICATIONS
Item No: E90
Light Source: 9pcs white LED
Power Source: 3AAA
Weight With Battery: 101g
Weight Without Battery:136g
ORANGE
| Item No. |
Work Mode |
Light distance |
Duration |
E90 |
●Press once, 1pc LED turn on
●Press twice, 3pc LED turn on
●Press three times,all LED turn on
●press four times,flash |
 18/12/10m |
|
Ⅰ.Use instruction
1.Instrall battery
First turn the locknut in the direction of counter clockwise,open the battery box,according to the right positive and negative extreme direction and put the AAA batteries into the box. Close the buttery box and lock the locknut.
●Attention:The batteries'type should be the same
●Avoid to mix the new and secondary batteries
2.Adjust the elastic band
According to personal head size,adjust the elastic band with the adjusting lock.
●Suggestion:If need to put on for long time,please make the band looser.
3.Turn on the headlamp
After putting on the headlamp correctrly,press the button and choose the work mode according to the surroundings and adjust the light angle.
●If you find the bracked is loosen,use the screwdriver to tighten it.
Ⅱ.Suitable environment
The suitable temperature for using is from -30℃ to 60℃,otherwise, the LED and the batteries' duration will be reduced. E series could not be used for diving, the water proof level is IPX4, and otherwise, the water leaking may cause a short circuit.
Ⅲ.Maintance and cleaning
●Please choose the same type of high quality alkaline battery.
●Please keep the elastric band dry after use.
●If the elastic band gets dirty, remove it and clean it separately.When it gets dry,assemble it as original.
●Aoid the glass lens in the lamp-chimmery scrubs with hard object,which will get the lens abrasion and affection the light transmission.
●If not use fore a long time,take out the battery to avoid leaking of the battery.
Ⅳ.Malfunction and resolvent
Press the button but the headlamp doesn't work.
●Check the battery box to find whether the positive and negative extreme is correct.
●Check the batteries to see if they are run out.Please choose the same type of high quality alkaline battery and avoid mixing the new and old batteries.
●If still can not solve the problem,contact your dealer.
